Máquina De Fusão Óptica Fujikura Fsm-60s Com Clivador Ct-30a

Tipo de produto:
Produto novo
Preço
R$ 29.89900

Anúncio finalizado

Informação sobre o vendedor

Localizado em :
Localizado em cuiabá (mato grosso)
Reputação

Tipo de vendedor

  1. Rojo
  2. Naranja
  3. Amarillo
  4. Verde claro
  5. Verde

O que isso significa?

Este vendedor ainda não tem vendas suficientes para ter a reputação calculada.

Ver mais dados deste vendedor

Descrição do anúncio

Resistência A Choque/poeira/chuva, Lançamento: Kit Completo

O MercadoLivre não vende este produto e não participa de qualquer parte da negociação, limitando-se apenas a anunciar produtos dos seus usuários.

SEJA BEM VINDO!

FORNECEMOS EQUIPAMENTOS E PEÇAS DE REPOSIÇÃO DE ALTA TECNOLOGIA PARA INSTALAÇÃO E MEDIÇÃO DE REDES DE FIBRA ÓPTICA

Máquina De Fusão Óptica Fujikura FSM-60S com Clivador CT-30A

pdf completo: http://www.logosnetwork.com.br/resources/FSM-60S_e.pdf


Fujikura FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30 drop test.

Fujikura FSM-60S splices a fiber in 9 seconds and heats a 60 mm splice sleeve in 30 seconds for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.

The software included in Fujikura FSM-60S package provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Fujikura FSM-60S – Features

  • Rugged construction providing shock, dust and moisture resistance
  • Dual monitor position with automatic image orientation
  • Automatic arc calibration and fiber identiication
  • User-selectable iber clamping method sheath clamp or iber holders
  • Auto-start tube heater feature
  • Color LCD display with anti-relective coating for excellent visibility in bright sunlight
  • Simultaneous battery charge and splicer operation
  • Long life battery (up to 160 splice/heat cycles per charge)
  • Detachable work table incorporated into the transit case
  • Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
  • Green friendly RoHS & WEEE compliant

Fujikura FSM-60S – Speciications

Applicable FibersSingle-mode (ITU-T G.652), multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter80 μm to150 μm
Coating Diameter100 μm to 1,000 μm
Fiber Cleave Length8 to 16 mm with 250 μm coating diameter, 16 mm with 900 μm coating diameter
Typical Average Splice Loss0.02 dB with Sm, 0.01 dB with mm, 0.04 dB with DS, 0.04 dB with NZDS
measured by cut-back method relevant to ITU-T and IEC standards
Splicing TimeTypical 9 seconds with standard single-mode fiber
Arc Calibration methodAutomatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes100 preset and user programmable modes
Splice Loss EstimateBased upon dual camera core alignment data
Storage of Splice ResultsLast 2000 results to be stored in the internal memory
Fiber DisplayX or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification300X for single X or Y view, or 187X for X and Y view
Viewing methodDual cameras with 4.1 inch TFT color LCD monitor
Operating Conditions0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50 °C respectively
Mechanical Proof Test1.96 to 2.25N
Tube HeaterBuilt-in tube heater with 30 heating modes; auto-start function
Tube Heating TimeTypical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length60mm, 40mm, micro
Splice/Heat Cycles with BatteryTypical 160 cycles with power save functions activated
Power SupplyAuto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
TerminalsUSB 1.1 (USB-B type) for PC communication. mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protectionmaximum wind velocity of 15m/s. (34 mph)
Dimensions (W × D × H )136 × 161 × 143 mm 
5.3 × 6.3 × 5.6 inches
Weight2.3 kg (5.1 lbs) with AC adapter ADC-11; 
2.7 kg (5.9 lbs) with BTR-08 battery

Fujikura FSM-60S Kit-A
 Fujikura FSM-60S Kit-A


FSM-60S Fusion Splicer Kit Includes (with cleaver)

  • CT30A Cleaver
  • ADC-13 AC Adapter
  • ACC-14 AC Cord
  • Spare Electrodes (1  pair)
  • Sheath Clamp
  • USB Cable
  • Splicer Carrying Strap
  • Quick Reference Guide
  • Video Instruction Manual
  • JP-05 Splice Sleeve Cooling Tray
  • Transit Case with Carrying Strap

Fujikura FSM-60S Kit-A Package Fujikura FSM-60S Kit-A Package

Fujikura FSM-60S Kit-A Package



PRAZO DE ENTREGA: em até 30 dias úteis
GARANTIA: 12 meses contra defeitos de fabricação
NOTA FISCAL: não emitimos NF para o valor anunciado

NÃO ACEITAMOS TROCAS, NÃO INSISTA, OBRIGADO!

Garantia:

12 meses contra defeitos de fabricação. Somos empresa, possuímos CNPJ com 10 anos de experiência.

Perguntas ao vendedor

Mais perguntas: