Pasta Térmica Artic Silver 5 - Pronta Entrega R$25

Pasta Térmica Artic Silver 5 

Entrega Imediata!!!

Sou conhecido em fóruns de hardware e tenho alguns recordes de benchmark, mas não é permitido no Mercado Livre colocar dados pessoais, porém, a pessoa que comprar  produto, poderá verificar e analisar minhas referências (tenho inúmeras referências 100% positivas, e meu user name "RBUASS" é muito conhecido nos fóruns e mecanismos de busca deste tipo de equipamentos).

 

Por favor, somente de o lance se realmente for comprar o produto; use o espaço para perguntas para esclarecer suas dúvidas

Entrego em qualquer lugar no Brasil VIA CORREIOS

Introducing Arctic Silver 5 With its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability.

Arctic Silver 5 is optimized for use between modern high-power CPUs and high performance heatsinks or water-cooling solutions. It is available in a convenient 3.5 gram syringe,

Features

Made with 99.9% pure micronized silver.

Arctic Silver 5 also contains micronized zinc oxide, aluminum oxide and boron nitride in addition to the silver. These thermally-enhanced ceramic particles improve the compound's performance and long-term stability.

Over 88% thermally conductive content by weight.

Arctic Silver 5 also contains micronized zinc oxide, aluminum oxide and boron nitride in addition to the silver. These thermally-enhanced ceramic particles improve the compound's performance and long-term stability.

Controlled triple phase viscosity.

Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.

(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)

Absolute Stability: Arctic Silver 5 will not separate, run, migrate, or bleed.

Thermal Conductance: >300,000 W/m² °C (0.001 inch layer)

Thermal Resistance: <0.005 °C-in²/Watt (0.001 inch layer)

Average particle size: <0.49 microns <0.000020 inch

Extended temperature limits: Peak: -50 °C to > 180 °C. Long-Term: -50 °C to 130 °C.

The Leader in Performance

3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.

Not electrically conductive.

Arctic Silver 5 was formulated to conduct heat, not electricity.

(While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)

Approximate coverage of Arctic Silver 5

Arctic Silver 5 is sold in 3.5 gram and 12 gram tubes. The 3.5 gram tube contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram tube will cover approximately 16 square inches.

Important Reminder:

Due to the unique shape and sizes of the particles in Arctic Silver 5's conductive matrix, it will take a up to 200 hours to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink or with a low speed fan on the heatsink.) The CPU's temperature will drop as much as 2C to 5C over this "break-in" period. This break-in will occur during the normal use of the computer.

Caution:

We do not recommend using Arctic Silver 5 on the older slot type Intel Xeon processors with large multiple square inch CPU to heatsink interfaces. The huge contact area and large gaps between the processor and the heatsink require a thermal pad or thick mesh-reinforced paste. Arctic Silver 5 can be used on socket type Xeons without a problem.